Alkali (pH Plus)

Description

pH Plus

Directions for use

1. Test the pH of your pool or spa daily. The pH of your water should be maintained between 7.2 and 7.6.
2. If you test kit reading indicates that the pH of your pool or spa is lower than 7.2 add pH Plus at a rate of 10gm per 1000 litres of water (e.g if your pool contains 7 litres of water add 70gm of pH Plus). One heaped teaspoon holds approximately 7gm of pH Plus.
3. Pre-dissolve in a clean plastic bucket filled with water.
4. Ensure that circulation system is running when adding pH Plus.
5. Slowly pour solution into water immediately above pool or spa return inlet.
6. Test pH daily and repeat dose until test reading indicates pH has been increased to 7.4,
7. Never add product when the pool or spa is being used; do not allow pool or spa to be used for 30 minutes after adding pH plus.